 |
   |
| Click to enlarge image(s) |
Operation software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.
- High-power and high-performance circuit
The E-Station BC6-10, Bantam BC6-10, 200 Watt Charger employs the circuit that has maximum output power of 200 Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A. Furthermore, the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program.
- Individual voltage balancer for Lithium batteries inside
BC6-10 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.
** When the 'Balance charge' mode being performed, the balancing adapter should be connected to the balancing tab of battery pack, as well as the charger's charging lead should be connected to the output of battery pack.
And also, please pay attention to the polarity of the battery pack's output which goes to the charger's output. If it is reversed, the short-circuit can be happened on the battery pack.
- Accept various types of Lithium battery
BC6-10 can accept three types of Lithium batteries - LiIo, LiPo and LiFe (A123). They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.
- Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.
- Data store/load
For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
- Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
- PC based analysis using USB communication
For technical expert, BC6-10 offers an optional PC based program can analysis the characteristic of the battery by the USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.
- Back-light LCD screen
You can adjust the brightness of LCD display
- Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat with a built in cooling fan.
FREE SHIPPING and HANDLING World Wide on Every order!
International Buyers must use PayPal for all International Purchases.
To see what flying events we will be at please view our Event Calendar!
Track your order useing: www.usps.com
Shopping Basket
| Items: | 0 |
| Subtotal: | $0.00 |
“
”
I just love your site! Aside from a huge selection of rc vehicles, you also have complete rc accessories. I don’t have to search other sites for particular stuff that I need. The best part is that you have reasonable prices too. I will always che…
“
”
I absolutely love the Zlowest I bought from you. It was easy to put together and even easier to handle. With all the rain we've been having I enjoy the abilitiy to take this into the local indoor arena.
Note: All prices in US Dollars
Specials
AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo. It comes with servo arms and screws. This mini servo is small in size, light in weight at 3.7g, but still has 5.5 oz.in of torque.
|
4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane, This is our latest model in the scale plane series. This version is based on the real Cessna latest design. This plane is made of 100% balsa wood and lite ply and is covered with a quality covering. The flying weight is up to 650g. The engine mount of this 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane is tailor-made for Turborix 1000rpm/v D2836 Brushless Motor (Not Included). It is very easy to install.
|
Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo AirLandSeaHobbies.com brings to the market a brand New Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo. With the built-in PC board, this HD digital mini servo has far greater accuracy and precision in response to your radio commands. The torque is more than 1.8Kgf.cm, 25.2 oz.in at 4.8v.
|
Scale EP J-3 Piper Cub ARF 4Ch RC Electric Powered 51.2 inch wing span You Will Love to fly the AirLandSeaHobbies ARF Scale Piper J-3 Cub. This scale J-3 Piper Cub is a 4 Chanel, Radio Controlled Electric Powered airplane. The balsa and ply wood laser cut parts interlock for a Light, Strong and Straight flying EP Cub. This scale J-3 Piper Cub ARF, comes to you prebuilt and covered in the Traditional Yellow color scheme.
|
4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane 4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane
|
2 CNC Aluminum Servo Arm for Futaba Servo (25 Tooth) This is a set of two (2) aluminum servo arms with 25 teeth for Futaba servos. The 2 CNC Aluminum Servo Arm for JR Servo (25 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo arm for Hitec Servo (24Tooth) This is a set of two (2) aluminum servo arms with 24 teeth for Hitec servos. The 2 CNC Aluminum Servo Arm for JR Servo (24 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) This is a set of two (2) aluminum servo arms with 23 teeth for JR servos. The 2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter The 2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter is a entry-level helicopter - Lama VI. This helicopter comes with the latest technology 2.4G radio gear. It is almost interference free. It is completely assembled and ready to fly out of the box. If you are looking an easy to fly, stable and easy to hover, it is the best buy for you! It can be flying in outdoor as well as indoor. With a coaxial counter-rotating head design that is very stable and almost any first-time flier can make hover like a
|
