AirLandSeaHobbies.com Eurgle 80A HV Programmable ESC with Internal data recorder
AirLandSeaHobbies.com Eurgle 80A HV Programmable ESC with Internal data recorder
Click to enlarge image(s)
AirLandSeaHobbies.com Eurgle 80A HV Programmable ESC with Internal data recorder. Brand new Eurgle 80A HV Brushless Motor Programmable ESC. The main feature of this ESC is that it comes with an internal data recorder logger. It may record the voltage, rpm, current, temperature and percentage of the throttle. If you want to get the data during flying but weight is a critical issue to you, internal data recorder is exactly what you need! If you buy the data recorder separately, normally it will cost you at least US$100, but now the data recorder is included with with the ESC!

Also, it is similar to the other ESCs in the market. You may either program it via handy programming card or by PC via USB adaptor. Both of them are also optional.

It is very easy to setup and program. Most of the settings are auto-detected. Also, it is made with higher quality micro processor and more FETs with lower internal resistance.

Features:
Microprocessor controlled
Integrated the function of flying data logger, could recording the flying data as:
* Current
* Voltage
* Temperature
* RPM
* Power
* Throttle Travel

Programmable the parameters of ESC through USB cable connected to computer
Upgradeable the firmware of ESC through Internet
80A continuous (90A surge)
Up to 20cells NiMH/NiCad or 2~6cell Lithium-polymer
High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
BEC:3.5A (Linear BEC)
Support 4 micro servos
Programmable low voltage cutoff
Programmable cutoff types(soft cutoff/hard cutoff)
Programmable brake type(disable/soft brake/hard brake)
Time advance programmable (low/standard/high)
Programmable current limiting(very sensitive/standard/insensitive/disable)
Governor mode(low rpm governor/high rpm governor)
Programmable start up type(very soft start/soft start/fast start)
Thermal Protection(100* centigrade)
Apply to most of inrunner and outrunner brushless motors.
No complex programming, auto adapt work mode.
A LED (flashes) indicates full throttle.
Runs motor in forward or reverse by swapping any two motor wire connections.
Safe “power on” arming program ensures motor will not accidentally turn on.
Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
The ESC is disabled when the voltage is over 26v at power-on.

Specification:
Input Voltage : 24v
Battery : 2-6S Lipo
Current (A) : 80A
Surge Current : 90A
BEC : 4A switching
Size : 70 x 27 x 17mm
Weight : ~54g
Package Weight : ~80g

Item(s) Included:
Eurgle 80A Brushless Motor Programmable ESC with Internal Data Recorder
English Manual
Home  ·  About Us  ·  Contact Us  ·  Shipping & Returns  ·  Privacy Policy  ·  Links

    

  
Copyright © AirLandSeaHobbies Cooperstown, NY
customerservice@airlandseahobbies.com