 |
    |
| Click to enlarge image(s) |
The AirlandSeaHobbies Intelligent Digital Multifunctional Balance Charger/Discharger, not only recharges batteries but can also discharge your batteries safely. And it comes with a set of connectors with USB cable for computer tracking / graphing. It is suitable for all your RC models batteries. This Digital Multifunctional Charger is computerized with a high performance microprocessor and specialized operating software. The AirLandSeaHobbies BC6 can maintain your battery at their best condition and also computer controled charge them safely.
Features:
Microprocessor controlled high-performance Rapid charger for NiCd/NiMH/Li-polymer/Li-ion/LiFe, A123 and Pb batteries
Include USB communicated analysis,(Monitor software supported). separate voltage detector for balance charge mode.
High-power and high-performance circuit
Optimized operating software
Maximum safety: Delta-peak sensitivity/Capacity limit/Temperature limit/Processing time limit/Input power monitor/Automatic cooling fan
Monitoring the voltage of individual cell
Data store/load
Temperature limit: the temperature of the battery on charging will raise by its internal chemical reaction. If the temperature increases too much the charging process cannot be accomplished properly and also the battery can be damaged. If you set the limit of temperature, the BC6 1 charger will auto shut down if your limit is exceeded..
Specification:
Input Voltage Range: 11-18v
Charge current range: 0.1-5.0A
Dis charger Rate : 0.1A - 1A
NiCad/NiMh cell : 1-15 cells
Li-ion, Lithium Polymer, LiFe (A123) cell : 1-6S
Lead Acid (PD) : 2 - 20V
Charge / Discharge Cycle : 1 - 5
Battery Memory : 10 models
Dimensions : 130 x 88 x 26mm
Weight : ~312g
Packing Weight : ~600g
Item(s) Included:
RC-Power BC6 1 charger
USB cable
Temperature sensor
DC clamp
Multifunctional extension wire
Igniter plug
JST plug
DuPont plug for receiver
English manual
CD disk
If you would like to add a 110v 5A power supply, add our rcps61302-ps power supply ($36.99) to your order from our Charger page.
FREE SHIPPING!!! To your door, Also Insured.
FREE SHIPPING and HANDLING World Wide on Every order!
International Buyers must use PayPal for all International Purchases.
To see what flying events we will be at please view our Event Calendar!
Track your order useing: www.usps.com
Shopping Basket
| Items: | 0 |
| Subtotal: | $0.00 |
“
”
I just love your site! Aside from a huge selection of rc vehicles, you also have complete rc accessories. I don’t have to search other sites for particular stuff that I need. The best part is that you have reasonable prices too. I will always che…
“
”
I absolutely love the Zlowest I bought from you. It was easy to put together and even easier to handle. With all the rain we've been having I enjoy the abilitiy to take this into the local indoor arena.
Note: All prices in US Dollars
Specials
AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo. It comes with servo arms and screws. This mini servo is small in size, light in weight at 3.7g, but still has 5.5 oz.in of torque.
|
4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane, This is our latest model in the scale plane series. This version is based on the real Cessna latest design. This plane is made of 100% balsa wood and lite ply and is covered with a quality covering. The flying weight is up to 650g. The engine mount of this 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane is tailor-made for Turborix 1000rpm/v D2836 Brushless Motor (Not Included). It is very easy to install.
|
Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo AirLandSeaHobbies.com brings to the market a brand New Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo. With the built-in PC board, this HD digital mini servo has far greater accuracy and precision in response to your radio commands. The torque is more than 1.8Kgf.cm, 25.2 oz.in at 4.8v.
|
Scale EP J-3 Piper Cub ARF 4Ch RC Electric Powered 51.2 inch wing span You Will Love to fly the AirLandSeaHobbies ARF Scale Piper J-3 Cub. This scale J-3 Piper Cub is a 4 Chanel, Radio Controlled Electric Powered airplane. The balsa and ply wood laser cut parts interlock for a Light, Strong and Straight flying EP Cub. This scale J-3 Piper Cub ARF, comes to you prebuilt and covered in the Traditional Yellow color scheme.
|
4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane 4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane
|
2 CNC Aluminum Servo Arm for Futaba Servo (25 Tooth) This is a set of two (2) aluminum servo arms with 25 teeth for Futaba servos. The 2 CNC Aluminum Servo Arm for JR Servo (25 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo arm for Hitec Servo (24Tooth) This is a set of two (2) aluminum servo arms with 24 teeth for Hitec servos. The 2 CNC Aluminum Servo Arm for JR Servo (24 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) This is a set of two (2) aluminum servo arms with 23 teeth for JR servos. The 2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter The 2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter is a entry-level helicopter - Lama VI. This helicopter comes with the latest technology 2.4G radio gear. It is almost interference free. It is completely assembled and ready to fly out of the box. If you are looking an easy to fly, stable and easy to hover, it is the best buy for you! It can be flying in outdoor as well as indoor. With a coaxial counter-rotating head design that is very stable and almost any first-time flier can make hover like a
|
