355w
 |
  |
| Click to enlarge image(s) |
Specification:
Model : D2836-1000
KV (rpm/v) : 1000
Voltage (v) : 11.1
No Load Current (A): 2.1
No Load Speed (rpm) : 12600
Load Current (A) : 28
Load Speed (rpm) : 7000
Recommended ESC : Turborix Advance 30A ESC
Propeller : 1050
Pull (g) : 1050
G/A : 52.5
Weight : 70g (±5g)
Packaging Weight : ~150g
Configuring Advise and Usage Limit:
1. Advise application power 355W
2. Momentary power 420W max
3. Propose configure for this motor:
* Battery---1700mAh 15C 3S lipo
* ESC---30A
* propeller--- AirLandSeaHobbies.com 10X5
4. Don't use or let carbon steel metal get very close to the motor when mounting. if metal gets pulled inside the motor by the magnetic field, then it could cause the motor to set up or cause the winding to short!
5. Please use stainless steel screws when mounting the motor, and the length of the screws shouldn't be longer than the pedestal mount, to not breach / damage the wire!
6. Motor temperature should not exceed 90℃
Configuration characteristic:
1. Magnet---N35SH
2. Silicon steel---0.35(mm)
3. Bearing---NMB
4. Shaft--- Carbon steel
5. Guide wind system--- Free cooling
6. Insulated material--- Somar Epoxy (Japan)
Reliability Testing:
1. Testing Condition
* Voltage---11.1(V)
* Propeller--- AirLandSeaHobbies 10X5
* Load current---20(A)
* Net Thrust---1050(g)
* Room temperature---25(℃)
* Run mode---5 Minute constant full power ON, 2 Minute OFF
* Shaft direction gap--- 0.05-0.2mm
* Noise no load---30db
2. After testing 100 times circle
* Net thrust---1000(g)
* Current---22(A)
* Temperature rising---85(℃)
* Shaft direction gap--- 0.1-0.2mm
* Run mode---5 Minute constant full power ON, 2 Minute OFF
Item(s) Included:
Turborix 1000rpm/v D2836 RC Brushless Motor
Mount
Front Propeller Adapter
Gold Connectors
Shrink Plastic Tubes
Screws
Our Price always includes the shipping!
FREE SHIPPING and HANDLING World Wide on Every order!
International Buyers must use PayPal for all International Purchases.
To see what flying events we will be at please view our Event Calendar!
Track your order useing: www.usps.com
Shopping Basket
| Items: | 0 |
| Subtotal: | $0.00 |
“
”
I just love your site! Aside from a huge selection of rc vehicles, you also have complete rc accessories. I don’t have to search other sites for particular stuff that I need. The best part is that you have reasonable prices too. I will always che…
“
”
I absolutely love the Zlowest I bought from you. It was easy to put together and even easier to handle. With all the rain we've been having I enjoy the abilitiy to take this into the local indoor arena.
Note: All prices in US Dollars
Specials
AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo. It comes with servo arms and screws. This mini servo is small in size, light in weight at 3.7g, but still has 5.5 oz.in of torque.
|
4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane, This is our latest model in the scale plane series. This version is based on the real Cessna latest design. This plane is made of 100% balsa wood and lite ply and is covered with a quality covering. The flying weight is up to 650g. The engine mount of this 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane is tailor-made for Turborix 1000rpm/v D2836 Brushless Motor (Not Included). It is very easy to install.
|
Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo AirLandSeaHobbies.com brings to the market a brand New Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo. With the built-in PC board, this HD digital mini servo has far greater accuracy and precision in response to your radio commands. The torque is more than 1.8Kgf.cm, 25.2 oz.in at 4.8v.
|
Scale EP J-3 Piper Cub ARF 4Ch RC Electric Powered 51.2 inch wing span You Will Love to fly the AirLandSeaHobbies ARF Scale Piper J-3 Cub. This scale J-3 Piper Cub is a 4 Chanel, Radio Controlled Electric Powered airplane. The balsa and ply wood laser cut parts interlock for a Light, Strong and Straight flying EP Cub. This scale J-3 Piper Cub ARF, comes to you prebuilt and covered in the Traditional Yellow color scheme.
|
4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane 4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane
|
2 CNC Aluminum Servo Arm for Futaba Servo (25 Tooth) This is a set of two (2) aluminum servo arms with 25 teeth for Futaba servos. The 2 CNC Aluminum Servo Arm for JR Servo (25 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo arm for Hitec Servo (24Tooth) This is a set of two (2) aluminum servo arms with 24 teeth for Hitec servos. The 2 CNC Aluminum Servo Arm for JR Servo (24 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) This is a set of two (2) aluminum servo arms with 23 teeth for JR servos. The 2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter The 2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter is a entry-level helicopter - Lama VI. This helicopter comes with the latest technology 2.4G radio gear. It is almost interference free. It is completely assembled and ready to fly out of the box. If you are looking an easy to fly, stable and easy to hover, it is the best buy for you! It can be flying in outdoor as well as indoor. With a coaxial counter-rotating head design that is very stable and almost any first-time flier can make hover like a
|
