 |
 |
| Click to enlarge image(s) |
Safety mode: The motor will NOT start no matter what the position of the throttle control stick is when the RC unit is switched on. When the throttle is not at lowest position, it will sound by "di-di-di" for warning.
Brake: On / Off (factory setting is Off).
Battery type: NiCd/NiMh, LiPo.
Number of batteries: automatic (when setting Battery Type, the ESC will set Number of Batteries automatically at the same time)
Start up mode: Soft start up, Hard start up (factory setting is soft start)
Timing mode: Soft timing-for 2, 4, 6 pole brushless motors, Hard timing-for 6 and more pole motors, Auto
Temperature protection: the controller will reduce output power when temperature reaches 120 degrees centigrade
Low voltage protection: reduce output power when the voltage goes down below the setting (setting of low voltage is 2.8V times number of batteries)
Specification:
Current (A) : 120A
BEC : N/A* (you will need a 3A BEC with Dual Output Voltage (5v-6v) for Brushless Electronic Speed Controller to power the receiver).(Not Included)
Suitable Battery : LiPo (3 to 6 cells); NiCd/NiMh (8-18 cells)
Size : 88.73 x 28.58 x 14.76mm
Weight : ~78g
Package Weight : ~105g
Item(s) Included:
Turborix 120A Electronic Speed Controller for Brushless Motor (AE Series, ESC)
FREE SHIPPING!!! To your door, Also Insured.
FREE SHIPPING and HANDLING World Wide on Every order!
International Buyers must use PayPal for all International Purchases.
To see what flying events we will be at please view our Event Calendar!
Track your order useing: www.usps.com
Shopping Basket
| Items: | 0 |
| Subtotal: | $0.00 |
“
”
I just love your site! Aside from a huge selection of rc vehicles, you also have complete rc accessories. I don’t have to search other sites for particular stuff that I need. The best part is that you have reasonable prices too. I will always che…
“
”
I absolutely love the Zlowest I bought from you. It was easy to put together and even easier to handle. With all the rain we've been having I enjoy the abilitiy to take this into the local indoor arena.
Note: All prices in US Dollars
Specials
AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo AirLandSeaHobbies.com, Turborix High Torque 3.7g Mini Servo. It comes with servo arms and screws. This mini servo is small in size, light in weight at 3.7g, but still has 5.5 oz.in of torque.
|
4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane, This is our latest model in the scale plane series. This version is based on the real Cessna latest design. This plane is made of 100% balsa wood and lite ply and is covered with a quality covering. The flying weight is up to 650g. The engine mount of this 4Ch RC 41” EP Cessna Balsa Wood Built Scale Plane is tailor-made for Turborix 1000rpm/v D2836 Brushless Motor (Not Included). It is very easy to install.
|
Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo AirLandSeaHobbies.com brings to the market a brand New Eurgle 9g 1.8 Kgf.cm 25.2 oz/in HD Carbon Plastic Gear Mini Digital Servo. With the built-in PC board, this HD digital mini servo has far greater accuracy and precision in response to your radio commands. The torque is more than 1.8Kgf.cm, 25.2 oz.in at 4.8v.
|
Scale EP J-3 Piper Cub ARF 4Ch RC Electric Powered 51.2 inch wing span You Will Love to fly the AirLandSeaHobbies ARF Scale Piper J-3 Cub. This scale J-3 Piper Cub is a 4 Chanel, Radio Controlled Electric Powered airplane. The balsa and ply wood laser cut parts interlock for a Light, Strong and Straight flying EP Cub. This scale J-3 Piper Cub ARF, comes to you prebuilt and covered in the Traditional Yellow color scheme.
|
4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane 4 Channel RC EP 35.4 ” Aerobatic GeeBee EPO Foamy ARF Scale Plane
|
2 CNC Aluminum Servo Arm for Futaba Servo (25 Tooth) This is a set of two (2) aluminum servo arms with 25 teeth for Futaba servos. The 2 CNC Aluminum Servo Arm for JR Servo (25 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo arm for Hitec Servo (24Tooth) This is a set of two (2) aluminum servo arms with 24 teeth for Hitec servos. The 2 CNC Aluminum Servo Arm for JR Servo (24 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) This is a set of two (2) aluminum servo arms with 23 teeth for JR servos. The 2 CNC Aluminum Servo Arm for JR Servo (23 Tooth) are made with a pinch bolt type fastener that securely locks into the teeth of the servo output shaft. Each servo arm comes with 2 socket head screws to securely fasten them to the servo shaft.
|
2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter The 2.4Ghz 4 Channel RC EP LAMA VI RTF Helicopter is a entry-level helicopter - Lama VI. This helicopter comes with the latest technology 2.4G radio gear. It is almost interference free. It is completely assembled and ready to fly out of the box. If you are looking an easy to fly, stable and easy to hover, it is the best buy for you! It can be flying in outdoor as well as indoor. With a coaxial counter-rotating head design that is very stable and almost any first-time flier can make hover like a
|
