Turborix 3A External Switchable MU-061 U-BEC,
Turborix 3A External Switchable MU-061 U-BEC,
Click to enlarge image(s)
AirLandSeaHobbies brings to the market a new 3A U-BEC Device with Dual Output Voltage for Brushless Electronic Speed Controllers.The Turborix 3A External Switchable MU-061 U-BEC is designed and produced with dual switching technology and is made using SMT. The features of this 3A U-BEC Device with Dual Output Voltage (5v-6v) for Brushless Electronic Speed Controllers are low power consumption, high efficiency, wide range of input voltage. This BEC is a switch-mode DC regulator separated from ESC (ESC-Electronic Speed Controller for brushless motor), it will take high voltage 5.5v-42v power from your battery pack and convert it to a consistent safe voltage for your receiver, gyro and servos. It is adjustable for 5V or 6V by installing or removing a jumper.

If you are using a speed controller with a built-in BEC, it will very likely have only a limited ability to supply power to your receive and servos without overheating. If you have a relatively high voltage battery pack or have heavy servo loads, you should consult the ESC specifications to determine what the stated recommendations or limitations are. In general, if you are using a 4s Lithium pack, or more than a 12-cells NiCd battery, you should consider using this 3A UBEC Device with Dual Output Voltage for Brushless Electronic Speed Controller. In such a case, most built-in BECs of ESCs only supports 2 servos, so they are not suitable for RC helicopters and big aircraft.

Features:
This UBEC (universal - Battery Eliminator Circuit) is an advanced switching regulator, provides over-current and over-heat protection function, and the switching frequency is 300KHz. The max efficiency of this chip is 92%.
The smallest size and the lightest weight.

Details, specification:
Input Voltage : 5.5V to 42V
Dual Output Voltage : 5V / 6V ( with a jumper)
Output Current : 3A
Regulator : dual switching technology
Indicator of Working Status : Red LED
Size : 35×20×12 mm
Wire Length : BEC 180mm, Power 300mm
Weight : ~12g
Package Weight : ~35g

Operating Instructions:
1. Select output voltage
A. 5V output (jumper in)
B. 6V output (remove jumper)
2. Connect U-BEC output to receiver
3. Connect U-BEC input to battery pack
4. The red LED will light when unit is powered up

Item(s) Included:
3A External Switchable MU-061 U-BEC
Instruction sheet

FREE SHIPPING!!!
Home  ·  About Us  ·  Contact Us  ·  Shipping & Returns  ·  Privacy Policy  ·  Links

    

  
Copyright © AirLandSeaHobbies Cooperstown, NY
customerservice@airlandseahobbies.com